What you need to know about ceiling integrated nails

Ceiling nail it does not trigger, the upper end simply applying sufficient force and pressure, depend on the interaction of backlash, so that the firing pin to strike the staple integrally on the rear side of the plastic sub-pads, triggers automatic ejection top nail Smokeless gunpowder forms a huge thrust instantly, pushing steel nails into the ceiling or wall base.

The ceiling nail shooter is powerful and can replace most expansion screws. Basically, it can be used in the ceiling where the expansion screws can be used. It can be used for high-standard concrete ceilings, pillars and other high-strength structural projects. The 10 cm steel plate can be easily penetrated.

An ordinary set of standard suspended ceilings, the standard length of the connecting rod is 3 meters, the length of the gun body is about 40 cm, the operable height is 6 meters, and the height above the ground can be easily operated within 6 meters, so there is no need to climb the ladder during the operation. risk.

In addition, the time to nail a nail on the suspended ceiling is about 10 seconds, the operation is small, friendly, healthy, and dust-free. The construction procedure is simple. There is no need to climb a ladder like an electric hammer to punch holes. Only one person needs to complete all the work. .

The bearing capacity of a nail shot is about 500 kilograms, and the nail is bent into the concrete to form a semi-hook shape. The foot of the nail is directly facing the ceiling wall and forms a lever principle with the floor slab, and the bearing force is very strong. If the nail is not shaken and loosened intentionally, under normal circumstances three or five strong men can hang it. There are many small videos like photos on the Internet that confirm this fact.

The basic principle is to use the special product structure, appearance, material and energy of the fastening system tool to change the technology of impact, expansion, impact, and impact drill bits used in traditional construction. In addition, impact drills, herringbone ladders, and wires are needed to replace the new high-tech products produced by traditional techniques that are resistant to stray shots and heat.