What should be paid attention to when using the ceiling nail shooter

The installation method is the same as that of the side panels, and the seams should be staggered with the side panels. Install fireproof, soundproof, and moisture-proof filler on the wall, and install and fill gypsum board on the other side. Even if you have a big guy, you can't save a fanatical person. In addition, its operation is also very simple, just determine the length of the boom and install the nails before punching. The index values are the bearing capacity and the amount of deformation. Because an integrated nail is inserted into the base, there is no different force direction between the cantilever rib and the nail on the vertical line, and the pulling force of the boom is transmitted to the steel nail through the foot to form a transverse shear force. When force is applied, the nail slides and rubs.

Because the temperature of the nail shooter will be higher after using for a period of time, it is easy to cause burns. When a large number of integrated bullet products are used, it is recommended to use the two nail shooters interchangeably, or use another nail tube; one nail shooter uses 40~ About 50 rounds (about 30 rounds in summer), you can use a nail tube and change it back when it cools down; the effect of cross-use before and after is better.

Instructions on use.

1. The user should bring gloves, protective caps, goggles and earmuffs.

2. When using, the nail shooter should be perpendicular to the plane of the substrate as much as possible, and then the nail shooter should be pushed hard to achieve the desired effect.

3. Remember to use the ejector every time you use it.

4. When using, do not squeeze the nail tube with your palm.

5. Do not aim the gun at yourself or others.

6. It is recommended to disassemble and clean every 200 rounds used, try to use kerosene to clean, do a good job of maintenance and prolong the service life.

7. When the shooting is not sound, try to be careful not to directly touch any part of the nail projectile body with your hands. If there is an unexploded residual shell that has not exited, you can only pull it out with the help of foreign objects.

8. It is forbidden to use in flammable and explosive places.

The above is the installation precautions of the ceiling, I hope it will be helpful to everyone, improve the working efficiency of the ceiling, and reduce hidden dangers.